Welding Materials
MIG Welding
specifications:
The welding parameters are Welding current, welding voltage and welding speed for MIG welding of work piece AISI1050 steel. In this work, the optimal parameters of welding speed are 200m. m/s, 300 m.m/s & 400 m.m/s, welding current are 180, 230 &280 amps, and welding voltage are 22, 24 &26 volts.
Magnets
specifications:
Magnet grades are usually given in units of Mega Gauss Oersteds (MGOe). One MGOe is the magnet's remanence in Gauss multiplied by its resistance to coercivity in Oersteds. Different magnets come in different grade ranges. High-energy flexible magnets, for instance, have lower grades, such as 1.1 or 1.6.
Welding Table
specifications:
Loading Capacity: 1 - 8 Ton.
Table Top: NITRIDED FINISHED.
Brand: FIXTO.
Material: NITRIDED.
Model Name/Number: NCG - 1510.
Usage/Application: WELDING AND FIXTURING.
Size: 1000 x 1000 to 5000 x 2000.
Dimension: 1000 x 1000 To 4000 x 2000
Clamp
specifications:
15.5mm x 7.5mm steel rail thickness.
Solid steel construction.
Industrial quality.
Shipping weight 0.5KG.
Size: 200MM X 80MM.
Helmate
specifications:
Optical quality: High-quality ADF guarantees an unlimited view on the work piece.
Light diffusion: Light rays are not broken when they hit against the welding helmet. ...
Homogeneity/translucency oscillation: High-quality ADF guarantees a homogeneous quality of translucency throughout the whole viewing window.
Welding Glooves
specifications:
Welders are known to work with intensive heat that's capable of melting metals, so imagine the kind of burns and injuries that could occur if that flame of a welder came into contact with skin. This is the most basic function of a welder's gloves, as their hands are always the closest body part to the flames and heat.
chipping Hammer
specifications:
Welding or chipping hammers are used to clean and remove slag from welds (dressing) and can also be used for boiler scaling applications. The all steel construction makes this hammer both solid and strong and features a striking head with a sharp conical point and a flat chisel bevelled end.
Angle Glinder
specifications:
Angle grinders can be powered by an electric motor or compressed air. The motor drives a geared head at a right-angle on which is mounted an abrasive disc or a thinner cut-off disc, either of which can be replaced when worn. Angle grinders typically have an adjustable guard and a side-handle for two-handed operation.